Description
Urethane 645: A revolutionary, solvent based urethane coating designed to repel chemicals and abrasions available in a clear or colored high gloss finish
*Please contact 888-230-5569 for special order colors
Coverage: 1.5 Gallon Kit Coverage: Up to 525 sq. ft., 3 Gallon Kit Coverage: Up to 1050 sq. ft., Slip Resistant Additive: 1 Unit per 3 Gallon Kit **Slip Resistant Additive is mixed into the Urethane 645, Aluminum Oxide 46 Grit: Up to 350 sq. ft. per quart light coverage, Aluminum Oxide 60 Grit: Up to 350 sq. ft. per quart light coverage, **Aluminum Oxide is not mixed in with the Urethane 645; it is cast into the Epoxy 325 primer or a first coat of the Urethane 645 while wet
If you are looking for this product in the State of California use Urethane 645-CA Compliant (Compliant with VOC regulations in the State of California)
- Feature: Durable Coating
- Chemistry: Aliphatic Urethane
- Colors: Clear, tile red, beige, medium gray, light gray, off white, white
- Finish: High gloss
- Category: Coating
- Carrier: Solvent
- Availability: 2 component kit
- Packaging: 1.5 Gallon Kit, 3 Gallon Kit
- Coverage: 350 sq. ft. per gallon at 3-5 mils wet film thickness
- Interior/Exterior: Interior
- Application Method: Roller/brush
- Application Temperature: 55-90 degrees F with relative humidity below 75%
- Number of Coats: 1
- New Concrete: Yes, at least 28 days after being poured
- Storage/Shelf Life: 1 Year
- Clean up: Ketone solvents
- VOC Content: 335 g/L
- Hardness: Shore D 65
- Impact Resistance: 160 in/lb
- Abrasion Resistance: 20 mg
- Adhesion: 350 psi
- Viscosity: 400 cps
- Primer: Epoxy 325
CURE TIMES: (70F)
- Pot Life – 1.5 – gallon volume: 2-4 hours
- Tack Free (dry to touch): 3-5 hours
- Recoat or Topcoat: 5-9 hours
- Light Foot Traffic: 14-24 hours
- Full Cure (Heavy Traffic): 3-5 days
CHEMICAL RESISTANCE
- 10% Sodium Hydroxide: Long Term Immersion
- 10% Sulfuric: Short Term Immersion
- 10% Hydrochloric Acid: Long Term Splash Spill
- 20% Nitric Acid: Short Term Splash Spill
- 50% Sodium Hydroxide: Short Term Immersion
- Acetic Acid 5%: Short Term Immersion
- Ethylene Glycol: Short Term Immersion
- Gasoline: Short Term Immersion
- Mek: Not Recommeded
- Methyl Alcohol: Short Term Splash Spill
- Xylene: Short Term Immersion
For complete Urethane 645 application, SDS Sheets, FAQ’s, testing and technical data visit www.ghostshield.com